Programming of side windows - MIN and MAX position

DS Automobiles
2

Hi @AvatarPL

Try both of these procedures. Hopefully one will work for you.

I think ‘sequential mode’ means bit-by-bit. So hold for half a second and let go, and repeat until fully closed/open.

Procedure 1

  1. Pull the electric window switch until the door window is completely closed.
  2. Release the electric window switch.
  3. Pull the electric window switch for at least 1 second.
  4. Lower the door window in sequential mode.
  5. Raise the door window again in sequential mode.

Procedure 2

  1. Raise the door window to trigger the anti-pinch system at the upper stop 3 times within less than 10 seconds.
  2. Pull the electric window switch until the door window is completely closed.
  3. Release the electric window switch.
  4. Pull the electric window switch for at least 1 second.
  5. Lower the door window in sequential mode.
  6. Raise the door window again in sequential mode.

Ds4 Window Programming.pdf (143.5 KB)